PAICAR 03 is a water based and silicon free refinishing polish. It means that micro-scratches and swirls are removed for real and not just covered. It means it is safe for user’s health and for the paint.
PAICAR 03 – Finish polishing compound for automotive
FINISH
Level of cut: 5/10
Level of gloss: 9/10
SILICON FREE
HOLOGRAMS KILLER
PAICAR 03 permanently removes holograms, delivering a first-class gloss. It also removes light dullness, swirls and polishing marks, as well as sand scratches P4000 and finer.
ROTORBITAL
PAICAR 03 gives its best in combination with a rotorbital polishing machine: this is best way to achieve premium gloss and a clean finishing, without holograms and marks.
DA-03 FOAM PAD
PAICAR 03 gives its best in combination with DA-03 blue medium-soft foam pad. This specific open-cell structure foam keep surface cool while polishing, without any risk of overheating.
SMALL QUANTITY NEEDED
PAICAR 03’s specific formula is highly concentrated. It means you need only few drops of product to cover even a wide area. The special blend of nano-abrasive particles and polishing agents will give the ultimate finish.
SIMPLE YET COMPLETE RANGE
PAICAR 03 – Finish polishing compound is just one of the compounds of PaiCar polishing line
The main purpose of PAICAR 03 is being used on dark coloured surfaces, after either PAICAR 01 or PAICAR 02 to enhance gloss level and remove any residual polishing mark and holograms.
Want to know all the technical details?
Download the Technical Data Sheet for PAICAR 03
HOW TO USE
Apply a small quantity of PAICAR 03 – Finish polishing compound on DA-03 blue foam pad and use the pad for spreading the compound on the surface. Select a rotorbital polisher and start at low RPM, then gradually increase revolutions and polish with crossed movements, namely left to right, up and down. Wipe the surface with a clean Silky Tech microfiber cloth, in order to remove any potential residue.