PAICAR 02 is a water based and silicon free cutting-polishing compound. It means that defects and scratches are removed for real and not just covered. It means it is safe for user’s health and for the paint.
Level of cut: 9
Level of gloss: 9
PAICAR 02 does not generate dust while polishing, thus allowing a very clean and easy process, as well as a deep gloss without swirls and polishing marks.
PAICAR 02 removes P1500-P3000 sand scratches, as well as deep marks, failings and dullness. It restores oxidized surfaces as well as can be used on new well dried paints.
PAICAR 02 gives its best in combination with a rotorbital polishing machine: the perfect balance between cutting and refinishing action. It may be used also with rotoeccentric and rotative polishers.
DA-02 FOAM PAD
PAICAR 02 gives it best when used with DA-02 orange medium-hard foam pad. This specific open-cell structure foam has been designed to enhance the performance of our compound.
When the need is to power the cut level of PAICAR 02 and remove deeper scratches, let’s take advantage of SL3 lamb wool pad and its superior cutting power.
SIMPLE YET COMPLETE RANGE
PAICAR 02 – Medium Cut polishing compound is just one of the compounds of PaiCar polishing line.
The key feature of PAICAR 02 is offering a perfectly balanced action: the high cutting power does not compromise the high level of gloss that can be achieved: fast cut and glossy finishing coexist, and this is the reason why it is considered a one-step compound.
Want to know all the technical details?
Download the Technical Data Sheet for PAICAR 02
HOW TO USE
Apply a small quantity of PAICAR 02 – Medium Cut polishing compound on DA-02 orange foam pad and use the pad for spreading the compound on the surface. Select a rotorbital polisher and start at low RPM, then gradually increase revolutions and polish with crossed movements, namely left to right, up and down. Wipe the surface with a clean Silky Tech microfiber cloth, in order to remove any potential residue. Follow the same procedure when using SL3 lamb pad, selecting a rotative polishing machine: start slow (800 RPM), increase gradually to 2000 RPM.